Home Home Slider

How To Adjust Sprinkler Heads 2021

Having trouble with sprinkler heads and don’t know how to adjust sprinkler heads? However it’s a simple task and most people can do it by themselves, but the problem is they don’t know how to start and which tools to use.

In this case today we will discuss adjusting sprinkler heads with all the related information, so you don’t have any further problems. So let’s start!

Why should you adjust sprinkler heads?

The best advantage of owning a sprinkler system is It will ensure the sufficient amount of water that you need. But the fact is if you don’t adjust your sprinkler heads, it may end up causing puddles. As a result, you can experience overwatering or not watering.

Before you go any further, you should know a couple of things. Firstly, there are lots of sprinkler heads available in the market, but all are not adjustable.

Some of them come with specific spraying pattern designs. The sprinkler heads that include a screw in the center, are adjustable.

Besides, the way of adjusting the sprinkler head can vary considering their type. Some of the popular types are spray type, rotating, or an impact. First of them supply even streams of water output.

Rotor sprinklers usually spray a single stream of water by rotating around. On the other hand, Impact sprinklers are the most popular option for covering wider areas and their mode of operation is pretty the same as rotary kind.

How does your sprinkler system work?

Another vital piece of information that you should know before diving into repairs. Most systems work in the following way

  • It has a water supply pipe that’s connected to the main water source.
  • Design with a ground-level valve box that’s separated into different underground irrigation zones
  • Another part is Zone valves and its work to control each irrigation zone.
  • The systems have an electronic controller and its job is to manage the time and duration of the watering sessions

Most of the irrigation zones are normally divided into different parts. Let me clear, a home may have several zones in the front yard to cover the flower bed and lawn.

Besides, it can have extra zones in the back and side yard. These configurations are extremely relying on the model and the yard.

After opening a zone, water starts flows through the underground pipes and reaches into the irrigation heads in the specific zone for a limited amount of time until the users shut the system off.

Let’s have a look at some common problem that users often experience:

  • Sprinkler zone not coming on
  • Sprinkler heads offer low-pressure water
  • Leaky zone valve
  • Individual sprinkler heads don’t work

How to adjust sprinkler heads- step by step guide

However adjusting sprinkler heads is not a tricky task, but applying the proper method is the vital thing. Besides, finding the exact type of sprinkler heads that you are using is a crucial job as you have to use the exact tools for the process. Once collecting the right tools, all you will have to do is paying attention to the needs of the lawn to ensure the appropriate adjustments.

Step 1: find out what type of sprinkler heads are in your yard

First of all, you have to determine what type of sprinkler head you are using. As we talk earlier, the types greatly vary the process. So let’s check the heads is it rotor, pop-up, or impact sprinklers.

Step 2: collect the right tool to adjust the sprinkler heads

Once you figure out the type of the heads, now right the exact tools for the particular type of sprinkler head. Some will allow you to adjust using a flathead screwdriver, while others may require special rotor tools.

Step 3: measure the areas of your yard that need water level adjustments

Collect some data on your areas that you want to adjust with the water level. You may find some easy signs like an area with brown grass and a place near a water pool. The intention is to figure out where the irrigation system needs most. So you have to supply more water to the brown grass area than water pool areas.

Step 4: a trial with spray level and radius

Then take some taste to find the spray level and water radius. Besides, keep the experiment continue while sprinklers are running so you can get the level and arc adjusted properly.

Step 5: use the proper tools to adjust the specific sprinkler heads

Rotor screwdriver: The Rain Bird Rotor tool will be an easy solution if you want to adjust Rain Bird sprinkler heads. At the same time, it will allow you to adjust other brands of rotor sprinklers.

Just put the screwdrivers into the arc adjustment slot and then turn clockwise to enhance the arc. Similarly, you can turn it counterclockwise if it needs to decrease the arc.

Rotor nozzle tool: some sprinkler heads may need special tools to adjust the heads. In this case, the Hunter Rotor Nozzle tool can help you out as it is designed with advanced technology that makes it better than common tools.

Slotted screwdriver: it’s a mostly used screwdriver that available in most houses. If you need a thin slotted screwdriver to adjust your sprinkler heads, it will be a better option to choose from.

Phillips head screwdriver: if you notice a Phillips head screw on the top of the sprinkler heads, then you will have to use a Phillips head screwdriver to adjust the heads.

Sprinkler adjustment multi-tool: if you have enough money and have a large yard with multi-type sprinkler heads then you should consider the Orbit Sprinkler System adjustment tool.

Thanks to the manufacturer as they are offering a 16-in-1 system. So you will have a range of options for sprinkler head adjustment.

Final words

If you still asking how to adjust sprinkler heads, then we will suggest you read article one again. We have covered all the detailed information so you can adjust your sprinkler heads whatever the type you have.

At the same time, the step-by-step guide with specific tools information will greatly help you to do the job successfully.


Previous articleMetal vs Wood Swing Sets Full Guide 2021-10bestsells
Next articleIs a Sprinkler System Worth It In 2021 All-Over?